Matrox MXO2 PCIe Host Adapter - Manual (Page 256)

232
Chapter 16, Using Matrox MXO2 with Telestream Wirecast
• No input signal/Invalid input signal If your Matrox hardware detects no
input signal or an invalid signal for an input, Disconnected or Invalid
Input Signal will be displayed. If the input is selected, the input indicator
switches between displaying the state ( Disconnected or Invalid Input
Signal ) and the expected video format for that input. To record the input,
you must connect a source that matches the displayed video format. If
needed, change the video format for your Matrox device in the
Source
Settings dialog box as explained in “Specifying your settings for Matrox
ISO recording” on page 221 .
Record log file
After every recording session (see “Recording session” on page 229 ) a record log
file ( Record.Log ) is generated. The Record.Log file is located in the same folder
that contains the files for that recording session. When dropped or skipped
frames occur during a recording session, the
Record.Log file provides a
breakdown of the events by input, and the time code of when the events occurred.
Specifying your output settings
To specify the output settings that you want for monitoring your source video and
audio on your Matrox hardware, select your Matrox device under
MATROX
INPUT DEVICES in the Source Settings dialog box, and then click the Output
Settings button.