Matrox MXO2 PCIe Host Adapter - Manual (Page 221)

197
Defining your A/V Tools options
Specifying your genlock settings for capture
¦ Note This section does not apply to Matrox MXO2 Mini.
You can select the source to which you want to genlock all devices connected to
your MXO2 system during capture, as well as adjust the timing settings for all
video outputs from MXO2.
For examples of how to connect an external sync source to your system, see
“Typical Matrox MXO2 connections” on page 19 , “Typical Matrox MXO2 Rack
connections” on page 28 , and “Typical Matrox MXO2 LE connections” on
page 37 .
° To specify your genlock settings for capture:
1 Click the Options button in the Matrox A/V Tools dialog box.
2 Click the Capture Settings button. This displays the Matrox Capture
Settings dialog box.
3 Click the Genlock tab.
4 The settings provided are similar to the genlock settings for playback (see
“Specifying your genlock settings for playback” on page 187 ), except the
settings apply only during capture.
¦ Note If you want to genlock to your video input source, select Video Input .
5 Click OK to save your settings.