Matrox MXO2 PCIe Host Adapter User Manual
Page 246
222
Chapter 16, Using Matrox MXO2 with Telestream Wirecast
1
Connect the video and audio input sources that you want to record to the
corresponding inputs on your Matrox hardware.
2
To configure your source settings, choose
Sources > Show Sources
Settings
.
3
In the
Source Settings
dialog box, under
MATROX INPUT DEVICES
,
select the Matrox device that you want to configure, and then specify your
source settings for recording as follows:
$
From the
Video
Format
list, select the video format that matches your
source video. If your video input is not presently connected because you
want to connect it later during your recording session, select the video
format that matches the input that you’ll be connecting. For a list of the
video input formats supported on the various MXO2 inputs, see
.