Matrox MXO2 PCIe Host Adapter - Manual (Page 202)

178
Chapter 12, Using Matrox A/V Tools
Selecting your capture folder
You can select the folder where you want A/V Tools to store your captured clips
by typing the drive and folder name directly into the
Capture Folder box, or by
using the Browse button.
To ensure the best capture and playback performance of your clips, save them on
one of your A/V drives.
A/V Tools will save your video and audio clips in a subfolder with the same
name as the
Tape ID . For example, if you selected D:\Matrox AV Tools Capture
as your capture folder, all video and audio clips from tape “MyTape” will be
saved in
D:\Matrox AV Tools Capture\MyTape .
Defining your playback settings
The Matrox Playback Settings dialog box has several pages that you can use to
specify various settings for working with A/V Tools. When you select your
editing video format in the
Options dialog box, many settings are optimized for
you.
Specifying your general settings
To specify your general settings for playback in A/V Tools:
1 Click the Options button in the Matrox A/V Tools dialog box.
2 Click the Playback Settings button. This displays the Matrox Playback
Settings dialog box.
¦ Note You can also access the Matrox Playback Settings dialog box by
right-clicking the clip list and selecting Playback Settings .
3 Click the General tab.
4 Under Scrubbing Mode , select Frame , 1st Field , or 2nd Field to indicate
whether you want to display frames or only one field when you scrub your
clips in the clip list using the transport controls. For example, you may want
to scrub the first or second field to eliminate the flickering that can be seen in