Gradall 534C-6 Parts Manual - Manual (Page 166)

9-3
HYDRAULIC CIRCUITS
Dump Circuit (532C-6)
Starting Serial No. 0188002
Original Issue 1-90
Revised 2-23-98
TO TEE
(see page 8-4)
TO
STEERING
ORBITROL
(SEE PAGE 9-10)
Item Part No. Qty. Description Of Part
1 Ref HYDROSTATIC DRIVE
TRANSMISSION (see page 10-18
for details)
2 8866-2240 1 SWIVEL NUT RUN TEE, 1/2 TUBE
3 8859-1207 1 O-RING
4 8471-7839 1 HOSE ASSY
5 9130-3059 1 TUBE ASSY
6 8471-7908 1 HOSE ASSY
7 8866-1362 1 CAP
8 8471-8999 1 HOSE ASSY
9 8866-2239 1 SWIVEL NUT RUN TEE, 3/8 TUBE
10 9108-3306 1 STRAIGHT THREAD ADAPTER
(includes o-ring)
8859-1206 1 O-RING
11 Ref FRONT DRIVE MOTOR ASSY (see
page 10-19 for details)
12 8471-7872 1 HOSE ASSY
13 8866-2227 1 SWIVEL NUT BRANCH TEE,
3/4 TUBE
14 8866-1345 1 REDUCER
8866-1408 1 NUT, 3/4 TUBE
Item Part No. Qty. Description Of Part
15 8471-7810 1 HOSE ASSY
16 8471-7906 1 HOSE ASSY (use with 9108-3066)
8471-9110 1 HOSE ASSY (use with oil cooler kit,
9112-5109)
17 Ref OIL COOLER ASSY (see page 5-6
for details)
18 8866-2108 2 ELBOW, 90 DEGREES (swivel nut)
19 8866-2008 1 CONNECTOR (includes item 20)
20 8859-1207 1 O-RING
21 Ref MAIN CONTROL VALVE (see page
10-9 for details)
22 8866-1364 1 HEX CAP, 3/8 TUBE
23 8866-2008 1 CONNECTOR (includes item 3)
24 7713-3053 1 CLAMP SET, 3/4 TUBE
25 7713-3052 1 COVER PLATE
26 8820-1010 2 HEX HD CAPSCREW, 1/4-20X2-1/4,
GR5
27 8850-1004 2 HEX NUT, 1/4-20
28 8855-1009 2 LOCKWASHER, 1/4
29 8856-1107 2 FLAT WASHER, 1/4
PCN 971217-JH * Added service note and additional hose to item 16.
*
SERVICE NOTE:
If oil cooler 9108-3066 has been replaced
with 9112-5109 oil cooler kit, be sure when
replacing item 16, the correct hose is used. *