Enterasys Networks 1G58x-09 - Manual (Page 698)

Security Configuration Command Set
Configuring 802.1X Authentication
14-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.2.1 show dot1x
Use this command to display 802.1X status, diagnostics, statistics, and reauthentication or
initialization control information for one or more port access entity (PAE) ports.
show dot1x [auth-diag] [auth-session-stats] [auth-stats] [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
• If no parameters are specified, 802.1X status will be displayed.
• If port-string is not specified, authentication information for all ports will be
displayed.
Examples
This example shows how to display 802.1X status:
auth-config (Optional) Displays authentication configuration
information.
auth-diag (Optional) Displays authentication diagnostics information.
auth-session-stats (Optional) Displays authentication session statistics.
auth-stats (Optional) Displays authentication statistics.
port-string (Optional) Displays information for specific PAE port(s).
For a detailed description of possible port-string values,
refer to
Section 4.1.2 .
Matrix>show dot1x
DOT1X is disabled.