Enterasys Networks 1G58x-09 - Manual (Page 649)

Process Overview: Routing Protocol Configuration
Configuring OSPF
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 13-55
13.1.2.25show ip ospf border-routers
Use this command to display information about OSPF internal entries to Area Border Routers
(ABRs) and Autonomous System Boundary Routers (ASBRs).
show ip ospf border-routers
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
Table 13-3 show ip ospf database Output Details
Output What It Displays...
Link ID Link ID, which varies as a function of the link state record
type, as follows:
• Net Link States - Shows the interface IP address of the
designated router to the broadcast network.
• Router Link States - Shows the ID of the router
originating the record.
• Summary Link States - Shows the summary network
prefix.
ADV Router Router ID of the router originating the link state record.
Age Age (in seconds) of the link state record.
Seq# OSPF sequence number assigned to each link state record.
Checksum Field in the link state record used to verify the contents upon
receipt by another router.
LinkCount Link count of router link state records. This number is equal
to, or greater than, the number of active OSPF interfaces on
the originating router.