Grass Valley PDR 200 Service Manual - Manual (Page 89)

Replacing the PAC208/216 Filter
PDR 200 Service Manual 5-7
Replacing the PAC208/216 Filter
Once the filter has been cleaned, reinstall the filter and front panel as follows:
1. Place the front panel bezel face down and attach the filter to the mounting posts on
the inside of the bezel (Figure 5-4).
2. Position the front panel bezel at the chassis so that the bezel mounting posts align with
the holes in the chassis and snap the front panel bezel onto the chassis.
Cleaning the Filters
The air filters supplied with this PDR200 and PAC208/216 can easily be cleaned and
used again. Wash them in warm water and mild detergent. Make sure the filters are
dry before reinstalling them and powering up the PDR200 or PAC208/216.
Additional Air Filters
Additional air filters can be ordered directly from Grass Valley Group. See the
Replaceable Parts Lists in Chapter 6 for the part numbers for the air filters.