Grass Valley PDR 200 Service Manual User Manual
Page 172
IND-6
PDR 200 Service Manual
Standby/On Switch 4-5
Starting the Diagnostics Program 4-21
Start-up Problems 4-9
Keyboard LEDs did not flash at
No Vdrpanel 4-9
NT won’t boot 4-10
Storage 1-4
SVGA Board Connectors A-1
sym720 illegal instruction detected 4-15
Symptom
All analog audio missing 4-19
All digital audio missing 4-18
Analog audio intermittent 4-19
Analog audio missing one channel 4-19
black or bad fields 4-17
Digital audio is intermittent 4-18
Digital audio missing one channel 4-18
Keyboard LEDs did not flash at power up
No Playback 4-16
No Vdrpanel 4-9, 4-10
No video 4-16
NT won’t boot 4-10
Record function starts and then stops 4-17
Video not as expected 4-16
Sync Extraction 3-7
System Control 1-3
System Drive, Removal and
System Fault 4-5
System Interface Problems 4-2
System Overview 3-2
System SCSI Error Messages 4-14
T
Test Equipment 2-1
Testing, Repair Verification 6-64
Theory of Operation 3-1
Audio Recording System 3-5
Master Enhanced Disk Recorder 3-8
Mother Board 3-6
Specific Boards 3-6
System Overview 3-2
Video Recording System 3-4
Time Code Specification 2-9
Time Code, Longitudinal 1-4
Timing Generator 3-7
Tools Required 5-1, 6-1
Troubleshooting 4-1
Initial Fault Isolation Checks 4-2
Making Basic Checks 4-1
Troubleshooting the SCSI Bus 4-14
U
United States and Canada, Grass Valley
Group Product Support iii
Unrecognized disk drive type 4-15
Updating an Emergency Repair Disk 5-8
Upgrades, software 5-8
utilDiskHandler
format returned for wrong drive 4-14
load microcode returned for wrong drive
realloc returned for wrong drive 4-14
V
Vdrpanel Support 3-15
VGA Board (Slot J2) 4-31
Video 1-3
Video Bus 3-6
Video Bus Interface 3-11
Video Problems 4-16
No Playback 4-16
No video or video is not as expected 4-16
Record function starts and then stops 4-17
When playing known good clip, black or
Video Recording System 3-4
Visual Inspection 5-2
W
When playing known good clip, black or bad
World Wide Grass Valley Group Product
Support iii