Grass Valley PDR 200 Service Manual - Manual (Page 123)

Board Retainer Brackets
PDR 200 Service Manual 6-31
To remove board retainer brackets:
1. Perform the procedure to remove the Profile chassis from the rack (page 6-6).
2. Remove the Profile chassis covers (page 6-8).
3. Use the Torx tool with the T10 tip to remove the screws which secure both brackets
to the Profile chassis (Figure 6-18).
4. Lift each bracket up and out of the Profile chassis.
Figure 6-18. Removal of Board Retainer Brackets
9675-2
1
3
4
2