Grass Valley PDR 200 Service Manual - Manual (Page 168)

IND-2 PDR 200 Service Manual
Ethernet A-3
Fibre Channel A-6
Local Area Network (LAN) Board A-3
Reference Genlock A-7
RS-232 A-10
SCSI II A-4
SVGA Board A-1
Could not configure 4-10
Couldn’t handle 720 non-SCRIPTinterrupt er-
ror 4-15
D
Diagnostic Test Exceptions 4-30
Diagnostics 4-21
Diagnostics Window Layout 4-25
Diagnostics Window Menu Bar 4-22
Digital Audio is intermittent 4-18
Digital Audio is missing one channel 4-18
Digital Audio Problems 4-18
Audio intermittent 4-18
Audio is missing one channel 4-18
Digital I/O 3-14
Disk Access 4-5
Disk Drive Tray, Removal and Replacement
6-22
Distribution Board, Removal and
Replacement 6-26
Done 4-29
drive timed out! 4-15
E
EISA Bus 3-6
EISA Bus Interface 3-7
EISA DMA Controller 3-10
EISA to EDR Interface 3-10
EISA to LPCI Interface 3-10
Electrical Characteristics
Power Source 2-10
Electrical Specifications 2-2
Power Supply 2-10
Reference Genlock 2-2
Time Code 2-2
Embedded Audio Problems 4-19
Empty Slots 4-32
EN55022 Class A Warning x, xv
Environmental Criteria 2-11
Error message 4-14
Can’t locate OS 4-9
Could not configure 4-10
Couldn’t handle 720
non-SCRIPTinterrupt error 4-15
drive timed out! 4-15
failed to start motor 4-15
File system corrupt 4-9
Hard disk controller failure 4-9
Hardware failure, contact Grass Valley
Group support 4-9
Microcode download to disk x.yy.zz
failed 4-15
phase mismatch error -- will reset SCSI
bus 4-15
SCSI Device Init
failed to start motor on device x.yy.zz
4-14
sym720 illegal instruction detected 4-15
Unrecognized disk drive type 4-15
utilDiskHandler
format returned for wrong drive 4-14
load microcode returned for wrong
drive 4-14
realloc returned for wrong drive 4-14
Error messages
Real time processor failure 4-9
Ethernet 1-4
Ethernet Connectors A-3
Ethernet LAN Board (Slot J3) 4-31
Europe, Grass Valley Group
Product Support iii
Executing All (Board) Tests 4-29
Executing Individual Board Tests 4-28
Executing Test All Boards 4-26
Exterior, Cleaning 5-2
External Fan, Removal and Replacement 6-29
F
failed to start motor 4-15
Fan Board, Removal and Replacment 6-21
Fan Fault 4-5
Fan Tray, Removal and Replacement 6-18
FCC Emission Control x, xv
FCC Emission Limits xi, xvi