Adept s800 s800 User Manual
Page 61
Chapter 5: Maintenance
Figure 5-3. Opening and Removing Chassis
12. A support bolt for hanging the chassis (p/n 07116-000) is provided in the Accessory Kit.
l
Unscrew the plug from the hole in the side of the robot body (left side, as viewed
from the AIB/eAIB)—see the following figure.
l
Screw the support bolt into the side of the robot body.
Figure 5-4. Support Bolt Hole
13. Carefully move the AIB/eAIB chassis to the side of the robot base and hang it from the
support bolt, as shown in the following figure.
Adept Cobra s800 Inverted Robot User's Guide, Rev H1
Page 61 of 142