Adept s800 s800 - Manual (Page 24)

Chapter 2: Robot Installation
NOTE: Check the tightness of the mounting bolts one week after installation, and
then recheck every 6 months. See Maintenance on page 55 for periodic
maintenance.
2.6 Connectors on Robot Interface Panel
Figure 2-5. Robot Interface Panel—AIB and eAIB
The following connections are the same for both the AIB and the eAIB:
24 VDC: for connecting user-supplied 24 VDC power to the robot. The mating connector is
provided.
Ground Point: for connecting cable shield from user-supplied 24 VDC cable.
Adept Cobra s800 Inverted Robot User's Guide, Rev H1
Page 24 of 142