Adept s800 s800 - Manual (Page 19)

Adept Cobra s800 Inverted Robot User's Guide, Rev H1
Page 19 of 142
Chapter 2: Robot Installation
2.1 Transport and Storage
This equipment must be shipped and stored in a temperature-controlled environment, within
the range -25 to +55 C. The recommended humidity range is 5 to 90 percent, non-condensing.
It should be shipped and stored in the Adept-supplied packaging, which is designed to
prevent damage from normal shock and vibration. You should protect the package from
excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport and store the packaged equipment (see
the following figure).
The robot must always be stored and shipped in an upright position in a clean, dry area that
is free from condensation. Do not lay the crate on its side or any other position: this could
damage the robot.
The robot weighs 51 kg (112 lb) with no options installed.
Figure 2-1. Robot on a Transportation Pallet
WARNING: Use a forklift or pallet jack to lift the robot
on its transportation pallet. Do not lift the robot from
other locations.