Adept s800 s800 - Manual (Page 125)

Chapter 9: IP-65 Option
the cables from the AIB/eAIB, or remove the AIB/eAIB from the robot for any reason, please
follow the procedures in this section.
CAUTION: Unless you need to replace a cable with a
new cable, the Roxtec cable seal assembly should not be
opened.
NOTE: If you only need to disconnect cables from the AIB/eAIB, you can do so by
just removing the cable entry housing cover, covered in this section. See Figure 9-4.
Figure 9-2. IP-65 Cable Entry Housing
Adept Cobra s800 Inverted Robot User's Guide, Rev H1
Page 125 of 142