Turning Technologies ExamView - Manual (Page 25)

ExamView Test Generator 25
Next Steps
After the program displays the test, you can edit/create questions, select additional questions, customize the appearance of
the test, save your work, or print the test.
Creating a New Test and Selecting Questions
The Test Builder and the Question Bank Editor are separate parts (or modules) of the ExamView Test Generator program. Be
sure that you are working in the Test Builder module.
1 Click or click File from the menu bar and select New Test.
2 Enter the Test Title (e.g., Chapter 1, Midterm, Section 1 Quiz, etc.).
3 Add up to 250 questions per test using any of the six question selection options.
4 Optionally, edit any of the questions you added to the test, or create a new question from scratch.
5 Optionally, customize the appearance of the test.
6 Save the test.
TIP
You can create a new test from scratch, or you can create a test using the QuickTest Wizard
and then add additional questions to the test.
Opening a Test
Test files from previous versions of the ExamView Test Generator program can be automatically opened. However, once a
test is saved in the new version, it cannot be opened in an older version. It is recommended that you use a different file name.
All tests use the TST file extension.
1 Click or click File from the menu bar and select Open Test.
If you just opened the ExamView Test Generator, select Open an existing test from the Welcome screen.
2 If necessary, identify the folder that contains the test file. If the file is located on a different drive or on a network, select
the corresponding drive.
3 Select the test and click Open.
NOTE
If you assigned a password to the test, you will be prompted to enter the password before you
can continue.
Clearing Questions from a Test
If you want to delete one or two questions, the best way is to highlight those questions (one at a time) and click the Delete
button. To delete all questions of the same type (e.g., multiple choice), highlight the question type header and click Delete.
turningtechnologies.com/user-guides