Show config voice-port fxs – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 91
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
3-33
Privileged Mode
show config voice-port fxs
Use the show config voice-port fxs command to display the FXS port information.
Syntax:
# show config voice-port fxs [
port]
Example:
adit 3500# show config voice-port fxs 1
voice-port fxs
no digit-map
dial-timeout 5
voice-port fxs 1
description Line 1
no comfort-noise
echo-cancel enable
input-gain 0
output-gain 0
signal loop-start
no per-line-logging
no shutdown
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
port
FXS port to display.
Adit 3104: Range = 1 - 24.
Adit 3500: Range = 1 - 4.
MSR: Range = 1 - 48.