No shutdown, Ppp authentication, Ppp encryption – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 408: Ppp authentication -6 ppp encryption -6
18-6
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPS Mode
no shutdown
Use the PPTP Server no shutdown
command to set the admin state of the server up (in-service)
.
To
set the admin state of the server down (out-of-service), see shutdown command on page 18-7.
Syntax:
(config-pptps)# no shutdown
Example:
(config-pptps)# no shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp authentication
Use the PPTP Server ppp authentication command to configure the support of authentication types for
the password. To disable PPP authentication, see no ppp authentication command on page 18-5.
Syntax:
(config-pptps)# ppp authentication [chap|ms-chap|ms-chapv2|pap]
Example:
(config-pptps)# ppp authentication chap
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp encryption
Use the PPTP Server ppp encryption command to configure the PPP encryption. To disable PPP
encryption, see no ppp encryption command on page 18-5.
Syntax:
(config-pptps)# ppp encryption {40-bit|128-bit|stateful}
Example:
(config-pptps)# ppp encryption stateful
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
chap
Support Challenge Handshake Authentication (CHAP)
ms-chap
Support Microsoft CHAP (MS-CHAP).
ms-chapv2
Support Microsoft CHAP Version 2 (MS-CHAPv2).
pap
Support an unencrypted password. Default.
Field
Definition
40-bit
MPPE-40 - Microsoft PPP encryption algorithm.
128-bit
MPPE-128 - Microsoft PPP encryption algorithm.
stateful
Enable the stateful state for encryption.