Shortcuts, Shortcuts -6 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 24
1-6
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Introduction
Shortcuts
Shortcuts
Keystroke
Description
Up Arrow
Use the up arrow key to re-display a previously entered command. Select the
up arrow repeatedly, to scroll through all the commands entered starting with
the most recent.
Left and Right Arrow
Will move curser one character to the left or right.
?
The question mark will display help for the current command.
[Tab]
Select the Tab key after entering a partial (but unique) portion of the CLI
command. This will result in the completion of a portion of the command
and will wait for further input.
Example:
(config)#sn [Tab]
(config)#snmp-server
auto complete
You need only enter enough letters to identify a command as unique. For
example, entering cont t1 1 at the Global configuration prompt provides you
access to the configuration parameters for the specified T1 interface.
Entering controller t1 1 would work as well, but is not necessary.
Backspace
Erases the character to the left.
History
The history shows up to a total of 100 commands. The history command will
show only the executed commands for the current mode/context.
[Ctrl+A]
Moves the curser to the beginning of the command line.
[Ctrl+E]
Moves the curser to the end of the command line.
[Ctrl+U]
Clears the current displayed command line.
[Ctrl+Z]
Exits from the current mode.