Framing, Fdl -5 framing -5 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 203
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
6-5
Configuration - T1 Controller Mode
fdl
Use the Controller T1 fdl command to set line Facilities Data Link (FDL) capabilities the T1 interface.
Syntax:
(config-cont-t1-{
n})# fdl
{none|t1.403}
Example:
(config-cont-t1-1)# fdl none
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
framing
Use the Controller T1 framing command to set the framing option for the designated T1.
Syntax:
(config-cont-t1-{
n})# framing
{d4|esf}
Example:
(config-cont-t1-1)# framing d4
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field
Definition
none
Disable FDL output messages. Default.
t1.403
Enable T1.403 FDL performance messages.
Field
Definition
d4
D4 Superframe (SF)
esf
Extended Superframe. Default.