History, No command, No shutdown – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 197: History -5 no command -5
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
5-5
Configuration - LCC Controller Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-cont-lcc-{
n})# history
Example:
(config-cont-lcc-1)# history
history
description Test-LCC
no shutdown
history
Supported Platforms:
MSR
no command
no shutdown
Use the Controller LCC no shutdown command to set the LCC up (in-service). To set the LCC
down (Out-of-Service), see the shutdown command on page 5-6.
Syntax:
(config-cont-lcc-{
n})# no shutdown
Example:
(config-cont-lcc-1)# no shutdown
Supported Platforms:
MSR