Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 166)

4-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no host-filter
Use the no host-filter command to remove a IP host name filter entry. To add a IP host name, see
host-filter command on page 4-19.
Syntax:
(config)# no host-filter name
Example:
(config)# no host-filter HostFilter1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ipsec authentication-retries
Use the no ipsec authentication-retries command to disable the block-ip feature. To enable block-ip,
see the ipsec authentication-retries command on page 4-21.
Syntax:
(config)# no ipsec authentication-retries
Example:
(config)# no ipsec authentication-retries
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ipsec log ike
Use the no ipsec log ike command to disable Internet Key Exchange (IKE) related logs. To enable IKE
logging, see ipsec log ike command on page 4-22
Syntax:
(config)# no ipsec log ike {auto-key|ike-int|ike-msg|msg-byte|
msg-enc-dec|msg_inp|msg-outp|pri-key|rej-packet}
Example:
(config)# no ipsec log ike msg-outp
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
name Name of an existing IP host name to remove.
Field Definition
auto-key Enable verbose automatic keying.
ike-int Enable verbose IKE IPSec interaction.
ike-msg Print all IKE message ignoring rate limit.
msg-byte Enable message’s raw byte option.
msg-enc-dec Enable message’s encryption and decryption.
msg_inp Enable message’s input structure.
msg-outp Enable message’s output structure.
pri-key Enable verbose private key.
rej-packet Enable verbose IKE reject packets.