No access-list, No authentication login, No date auto-time-update – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 163
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
4-37
Global Configuration Mode
Global Configuration Commands
no access-list
Use the no access-list command to remove an advanced filtering entry. To add a filter, see access-
list command on page 4-5.
Syntax:
(config)# no access-list rule
rule-name apply {eth-lan|eth-wan
|ppp-wan|initial|final}
Example:
(config)# no access-list rule TestRule-1 apply eth-lan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no authentication login
Use the no authentication login command to disable RADIUS for login authentication. To enable
RADIUS login authentication, see authentication login command on page 4-6.
Syntax:
(config)# no authentication login use-radius
Example:
(config)# no authentication login use-radius
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no date auto-time-update
Use the no date auto-time-update command to stop the automatic update the clock from the
defined server. To enable automatic update of the clock, see date auto-time-update command on
page 4-8.
Syntax:
(config)# no date auto-time-update
Example:
(config)# no date auto-time-update
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
rule-name
Enter an existing rule name to apply this command to.
eth-lan
Ethernet LAN interface.
eth-wan
Ethernet WAN interface.
initial
Initial rules defined here will be applied first to the interface.
final
Final rules defined here will be applied last to the interface.
ppp-wan
PPP WAN interface.