Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 178)

4-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no vlan
Use the no vlan command to clear all VLANs. To enter the VLAN configuration mode, see vlan
(global) command on page 4-63.
Syntax:
(config)# no vlan
Example:
(config)# no vlan
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no voice-codec
Use the no voice-codec command to remove a voice codec. To set the voice codecs, see voice-codec
command on page 4-64.
Syntax:
(config)# no voice-codec {g711alaw|g711ulaw|g729}
Example:
(config)# no voice-codec g711alaw
Supported Platforms: Adit 3104, Adit 3500, MSR
no voice-port trunk
Use the no voice-port trunk command to disable the Voice Port Trunk. To enter the Voice Port
Trunk configuration mode, see voice-port trunk command on page 4-66.
Syntax:
(config)# no voice-port trunk port
Example:
(config)# no voice-port trunk 1
Supported Platforms: Adit 3500, MSR
Field Definition
g711alaw G.711, 64kbps, u-law
g711ulaw G.711, 64kbps, A-law
g729 G.729, 8kbps
Field Definition
port Trunk port number. Value must be 1.