Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 382)

17-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPC Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-pptpc-{n})# history
Example:
(config-pptpc-1)# history
history
ip mtu aut
ip rip enable
ip rip receive-version 1or2
ip route-mode route
metric 3
ppp exec-timeout 1500
ppp restart-timer 600
ppp authentication chap
history
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
host-ip
Use the PPTP Client host-ip command to configure the IP address for the host.
Syntax:
(config-pptpc-{n})# host-ip { address}
Example:
(config-pptpc-1)# host-ip 192.168.2.101
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
address Enter the IP address for the host.