Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 329)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-9
Configuration - IPSec Mode
lifetime
Use the IPSec mode lifetime command to set the connection lifetime.
Syntax:
(config-ipsec {n})# lifetime time seconds
Example:
(config-ipsec-1)# lifetime time 70000
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
local-subnet
Use the IPSec mode local-subnet command to set the local subnet IP address.
Syntax:
(config-ipsec {n})# local-subnet {none|range {start-address
address end-address address}|single ip address|subnet ip
address}
Example:
(config-ipsec-1)# local-subnet range start-address 192.168.1.1
end-address 192.168.1.10
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
seconds Set the connection lifetime. Range 1-86400 seconds, with a default of
86400.
Field Definition
none No IP address.
range Enter an IP address range.
start-address - Enter the start IP address of the range.
end-address - Enter the end IP address of the range.
single ip Enter a single IP address.
subnet ip Enter a subnet IP address.