Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 321)

C
HAPTER
14
Configuration - IPSec Mode
The IPSecConfiguration commands allow the user to configure the VPN IPSec parameters.
Enter this sub-group with the (config)# ipsec vpn_ipsec command from the Configuration mode.
The IPSec commands are represented by the (config-ipsec-n)# prompt.
Note: First a connection must be created. See ipsec net-to-host command on page 4-23, or ipsec net-to-
net command on page 4-24.
For an example of Configuring an IPSec Connection, see Example of IPSec Connection
Configuration command on page 14-21.
IPSec Commands
• aggressive-mode • key
• authentication • lifetime
• description • local-subnet
• do • max-retries
• dpd-delay • mode
• dpd-enable • net-type
• dpd-timeout • netbios remote-brc-addr
• encryption • no commands
• end • reconnect
• exit • rekey
• group • remote-ip
• hash • remote-subnet
• history • schedule-availability
• ip route metric • session-key
• ipsec-conn • set-pfs
• ipsec-manual • transform-set