Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 173)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-47
Global Configuration Mode
Global Configuration Commands
no remote-admin telnet
Use the no remote-admin telnet command to remove remote administration via Telnet. To enable
remote access via telnet, see remote-admin telnet command on page 4-55.
Syntax:
(config)# no remote-admin telnet {primary-port|
primary-secure-port|secondary-port
Example:
(config)# no remote-admin telnet primary-port
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no remote-admin udp-trace
Use the no remote-admin udp-trace command to remove remote access to UDP traceroute
queries. To enable remote access for UDP, see remote-admin udp-trace command on page 4-55.
Syntax:
(config)# no remote-admin udp-trace
Example:
(config)# no remote-admin udp-trace
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
primary-port Primary Telnet port, default port 23
primary-secure-
port Secure Telnet over SSL port, default port 992
secondary-port Secondary Telnet port, default port 8023