Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 111)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-53
Privileged Mode
show pptps
Use the show pptps command to display the PPTP Server settings.
Syntax:
# show pptps
Example:
adit 3500# show pptps
state = Enable
status = Invalid vpn license
Idle_Time = 1200
Authentication = MS-CHAP MS-CHAPv2 PAP
Encryption = MPPE-40 MPPE-128 (Stateless)
Remote IP Address Range = 192.168.1.245 - 192.168.1.254
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
show route
Use the show route command to display the routing table.
Syntax:
# show route
Example:
adit 3500# show route
Destination Gateway Flags Metric Interface
192.168.1.0/24 * U 50 Ethernet 1
192.168.1.0/24 * U 51 IPsec 1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR