Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 211)

C
HAPTER
7
Configuration - DHCP Pool Ethernet Mode
The DHCP Pool Configuration commands allow the user to configure the DHCP parameters for each
interface.
This sub-group is entered with the (config)# ip dhcp pool ethernet command from the Configuration
mode.
The DHCP Pool commands are represented by the (config-dhcp-eth-{n})# prompt.
DHCP Pool Commands
• do
• end
• end-address
• exit
• history
• lease
• no commands
• option
• relay
• start-address
• static-lease
• subnet-mask
• wins server