18–configuration - pptps mode, Configuration - pptps mode, Chapter 18, configuration - pptps mode – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual

Page 403: Hapter

Text mode
Original mode

HAPTER

Configuration - PPTPS Mode

The PPTP Server Configuration commands allow the user to configure the VPN (Virtual Private
Network) Point-to Point Tunneling Protocol Server parameters.
Enter this sub-group with the (config)# pptps command from the Configuration mode.
The VPN PPTP Server commands are represented by the (config-pptps)# prompt.

PPTP Server Commands

• do

• end

• end-address

• exit

• history

• idle-time

• no commands

• ppp authentication

• ppp encryption

• shutdown

• start-address