No ip route, No ip secondary-dns, No ppp authentication – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 395: No ppp encryption
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
17-17
Configuration - PPTPC Mode
no ip route
Use the PPTP Client no ip route command remove an IP route. To add a route, see ip route
command on page 17-11.
Syntax:
(config-pptpc-{n})# no ip route
dest-ip-addr gateway
Example:
(config-pptpc-1)# no ip route 192.168.100.200 192.168.100.254
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ip secondary-dns
Use the PPTP Client no secondary-dns command to disable the secondary DNS. To enable the
secondary DNS, see ip secondary-dns command on page 17-12.
Syntax:
(config-pptpc-{n})# no ip secondary-dns
Example:
(config-pptpc-1)# no ip secondary-dns
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp authentication
Use the PPTP Client no ppp authentication command disable PPP authentication
.
To enable PPP
authentication, see ppp authentication command on page 17-20.
Syntax:
(config-pptpc-{n})# no ppp authentication
Example:
(config-pptpc-1)# no ppp authentication
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp encryption
Use the PPTP Client no ppp encryption command to disable PPP encryption. To enable PPP
encryption, see ppp encryption command on page 17-20.
Syntax:
(config-pptpc-{n})# no ppp encryption
Example:
(config-pptpc-1)# no ppp encryption
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
dest-ip-addr
Enter destination IP address to remove.
gateway
Enter gateway IP address to remove.