Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 78)

3-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show alarms
Use the show alarms command to display the active alarms.
Syntax:
# show alarms [t1 port|lcc number]
{alert|all|critical|info|major|minor}
Example:
adit 3500# show alarms major
Alarm Severity Time
Alarm LOS T1 4 Major Jan 1 00:00:08 2006
Alarm LOS T1 3 Major Jan 1 00:00:08 2006
Alarm PRI T1 2 - Line NOT Ready Major Jan 1 00:00:07 2006
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
t1 port Display alarms for a specific port.
Adit 3104: Value must be 1.
Adit 3500: Range = 1-4.
lcc number Display alarms for a specific Link Cross-Connect (LCC).
MSR: Range = 1-8.
alert Filter alert alarms (threshold crossing).
all Display all alarms.
critical Filter critical alarms.
info Filter information alarms.
major Filter major alarms.
minor Filter minor alarms.