Session-timer timeout, Sip-port, Transport – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 479: Sip-port -19 transport -19
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
25-19
Configuration - Voice Service SIP Mode
session-timer timeout
Use the Voice Service SIP session-timer timeout command to configure the interval of idle time
to pass before timeout.
Syntax:
(config-voice-serv-sip)# session-timer timeout
seconds
Example:
(config-voice-serv-sip)# session-timer timeout 2500
Supported Platforms:
Adit 3104, Adit 3500, MSR
sip-port
Use the Voice Service SIP sip-port command to select a TCP or UDP port to receive SIP traffic.
Syntax:
(config-voice-serv-sip)# sip-port
port
Example:
(config-voice-serv-sip)# sip-port 2500
Supported Platforms:
Adit 3104, Adit 3500, MSR
transport
Use the Voice Service SIP transport command to configure the transport layer protocol to be used for
carrying SIP payloads. Note: UDP is commonly used and is the default.
Syntax:
(config-voice-serv-sip)# transport {tcp|udp}
Example:
(config-voice-serv-sip)# transport udp
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
seconds
Range 90 - 7200 seconds, with a default of 1800.
Field
Definition
port
Range 1026 - 65535, default is 5060
Field
Definition
tcp
Transmission Control Protocol.
udp
User Datagram Protocol