No schedule-availability, No shutdown, No sip-alg – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 290
12-20
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Multilink Interface Mode
no schedule-availability
Use the Multilink Interface no schedule-availability
command to disable a schedule rule
.
To add
a rule, see schedule-availability command on page 12-24.
Syntax:
(config-int-mlink-{
n})# no schedule-availability
Example:
(config-int-mlink-1)# no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no shutdown
Use the Multilink Interface no shutdown
command to set the Multilink port up (In-Service)
.
To set
the interface down (Out-of-Service), see shutdown command on page 12-24.
Syntax:
(config-int-mlink-{
n})# no shutdown
Example:
(config-int-mlink-1)# no shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no sip-alg
Use the Multilink Interface no sip-alg
command to disable SIP ALG on this interface. To enable
SIP ALG, see sip-alg command on page 12-25.
Syntax:
(config-int-mlink-{
n})# no sip-alg
Example:
(config-int-mlink-1)# no sip-alg
Supported Platforms:
Adit 3104, Adit 3500, MSR