Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 218)

7-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - DHCP Pool Ethernet Mode
subnet-mask
Use the DHCP Pool subnet-mask command to define the subnet mask for the DHCP pool.
Syntax:
(config-dhcp-eth-{ n})# subnet-mask mask
Example:
(config-dhcp-eth-1)# subnet-mask 255.255.255.0
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
wins server
Use the DHCP Pool wins sever command to set the WINS server IP address of the client address pool.
Syntax:
(config-dhcp-eth-{ n})# wins server address
Example:
(config-dhcp-eth-1)# wins server 192.168.3.1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
mask Enter the DHCP pool subnet mask, using the form xxx.xxx.xxx.xxx,
where xxx is a number from 0 to 255. This is an optional setting.
Field Definition
address The WINS server IP address of the client address pool, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255