Show mac-address-table, Show nat-fw – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 108
3-50
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show mac-address-table
Use the show mac-address-table command to display the current MAC addresses (LAN\WAN).
Syntax:
# show mac-address-table
Example:
adit 3500# show mac-address-table
Ethernet 1 mac= 00:00:00:ff:ff:ff
Ethernet 2 mac= 00:00:00:ff:ff:fd
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show nat-fw
Use the show nat-fw command to display the current NAT and firewall connection table.
Syntax:
# show nat-fw
Example:
adit 3500# show nat-fw
Number Content
1 TCP 11.0.0.4 36104<--> 172.15.16.1 36104[31.0.0.6 5516 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1320 pkts 7 ppp100 Outgoing BY FTP
2 TCP 11.0.0.4 36103<--> 172.15.16.1 36103[31.0.0.6 21 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1182 pkts 20 FTP child: Yes ppp100 Outgoing
3 TCP 11.0.0.4 36102<--> 172.15.16.1 36102[31.0.0.6 5515 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1320 pkts 7 ppp100 Outgoing BY FTP
4 TCP 11.0.0.4 36101<--> 172.15.16.1 36101[31.0.0.6 21 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1182 pkts 20 FTP child: Yes ppp100 Outgoing
5 UDP 172.15.16.2 28015<--> 172.15.16.2 28015[*.*.*.* *] ttl
79 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
6 UDP 172.15.16.2 28014<--> 172.15.16.2 28014[*.*.*.* *] ttl
79 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
7 UDP 172.15.16.2 28013<--> 172.15.16.2 28013[*.*.*.* *] ttl
77 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
8 UDP 172.15.16.2 28012<--> 172.15.16.2 28012[*.*.*.* *] ttl
77 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
9 UDP 172.15.16.2 28011<--> 172.15.16.2 28011[*.*.*.* *] ttl
75 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
10 UDP 172.15.16.2 28010<--> 172.15.16.2 28010[*.*.*.* *] ttl
75 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR