Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 172)

4-46 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no pptps
Use the no pptps command to disable the VPN PPTP server. To enter the VPN PPTPS configuration
mode, see the pptps command on page 4-53.
Syntax:
(config)# no pptps
Example:
(config)# no pptps
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no radius-client
Use the no radius-client command disables the RADIUS configuration. To enter the RADIUS
configuration mode, see radius-client command on page 4-54.
Syntax:
(config)# no radius-client
Example:
(config)# no radius-client
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no remote-admin icmp
Use the no remote-admin icmp command to remove access of ICMP echo requests (ping and
ICMP traceroute queries). To enable ICMP echo requests, see remote-admin icmp command on
page 4-54.
Syntax:
(config)# no remote-admin icmp
Example:
(config)# no remote-admin icmp
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no remote-admin snmp
Use the no remote-admin snmp command to remove SNMP control and diagnostic requests. To
enable SNMP, see remote-admin snmp command on page 4-54.
Syntax:
(config)# no remote-admin snmp
Example:
(config)# no remote-admin snmp
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR