Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 301)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-5
Configuration - Serial Interface Mode
firewall
Use the Serial Interface firewall command to enable the configured firewall. To delete a preference, see
no firewall command on page 13-14.
Syntax:
(config-int-ser-{ n})# firewall enable
Example:
(config-int-ser-1)# firewall enable
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-int-ser-{ n})# history
Example:
(config-int-ser-1)# history
encapsulation ppp
metric
ppp on-demand
ppp encryption 128-bit
ppp restart-timer 10
ppp time-btwn-reconnect 40
ip rip enable
history
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR