Ppp link-fragmentation, Ppp on-demand, Ppp password – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 318
13-22
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Serial Interface Mode
ppp link-fragmentation
Use the Serial Interface ppp link-fragmentation command to configure the threshold byte size of the
packet, for Interleaving. Note: If the packet is > the set threshold, the packet will be split in half and
sent.
Syntax:
(config-int-ser-{
n})# ppp link-fragmentation number
Example:
(config-int-ser-1)# ppp link-fragmentation 600
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp on-demand
Use the Serial Interface ppp on-demand command to enable on demand the feature. On demand
attempts to connect only when packets are sent. To disable PPP on demand, see no ppp encryption
command on page 13-19.
Syntax:
(config-int-ser-{
n})# ppp on-demand
Example:
(config-int-ser-1)# ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp password
Use the Serial Interface ppp password command set the PPP password. To delete a PPP password, see
no ppp password command on page 13-19.
Syntax:
(config-int-ser-{
n})# ppp password password
Example:
(config-int-ser-1)# ppp username test-user-pswrd
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
number
Range 320 - 1600, with a default of 1600 bytes.
Field
Definition
password
Enter the PPP password, with a maximum of 19 characters.