Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 367)

C
HAPTER
16
Configuration - OSPF Mode
The Router OSPF Configuration commands allow the user to configure the OSPF parameters.
OSPF (Open Shortest Path First) is a protocol based on the link-states of routers within a network. OSPF
supports hierarchical routing by segmenting a larger network into smaller more manageable networks
called areas.
Enter this sub-group with the (config)# router ospf command from the Configuration mode.
The Router OSPF commands are represented by the (
config
-ospf)# prompt.
Router OSPF Commands
• area authentication
• area stub
• compatible rfc1583
• do
• end
• exit
• history
• network area
• no commands
• router-id