No ip dhcp pool ethernet, No l2tpc, No local-server – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 169
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
4-43
Global Configuration Mode
Global Configuration Commands
no ip dhcp pool ethernet
Use the DHCP Pool no ip dhcp pool ethernet command to disable the DHCP server for the
interface defined. To enter the DHCP configuration mode, see ip dhcp pool ethernet command on
page 4-25.
Syntax:
(config)# no ip dhcp pool ethernet
port
Example:
(config)# no ip dhcp pool ethernet 2
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no key
Use the no key command to disable a keyed feature. To enable a keyed feature, see the key command
on page 4-26.
Syntax:
(config)# no key
key-code
Example:
(config)# no key q0B8yma2IsSL+1BarY0u
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no l2tpc
Use the no l2tpc command to disable the VPN L2TPC. To enter the VPN L2TPC configuration mode,
see the l2tpc command on page 4-26.
Syntax:
(config)# no l2tpc {l2tpc
connection-id|address address}
Example:
(config)# no l2tpc l2tpc 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
port
Ethernet port number. 1 or 2.
Field
Definition
key-code
Enter the key code to disable the feature.
Field
Definition
connection-id
Enter the name of a connection.
address
Enter a destination IP address.