Interlogix DVR 42 User Manual - Manual (Page 93)

TruVision DVR 42 User Manual 91
• Post-record: This is the time the camera continues to record after the
event. Select the time in seconds to stop post-recording after the event.
• Auto Delete (day): Select the number of days after which recorded video
from the specified camera is permanently deleted from the HDD. A “day”
is defined as the 24-hour period from when the auto delete mode (ADM)
was set.
The maximum number of days that can be set is 60. However, the actual
number of days permitted depends on the HDD capacity. If the value is set
to ‘0’, the option is disabled.
• Redundant Record/Capture: Select the camera to be used for
redundancy. Default is No. See “HDD redundancy” on page 98 for more
information.
• Record Audio: Select Yes to record sound with the images.
4. Click Apply to save the settings.
5. If you want to save these parameters to another camera, click Copy and
select the camera in the pop-up screen that appears. Click OK and return to
the main window.
6. Click the Capture tab and configure the settings for captured video, such as
snapshots. Click Apply to save the settings.
7. Click Back to return to live view.
Calculating the maximum permitted frame rates and bit
rates
You can easily calculate the correct frame rates, bit rates, and HDD free space
required for your system.
Note: If you should later change any recording parameters, the calculated values
will no longer apply.
To configure recording settings:
1. From the menu toolbar, click Video Schedule > Encoding > Encode
Parameters Recommendation .
2. Enter the number of days to be recorded (1) and the resolution (2). Also
specify whether the recoding period will include weekdays and weekends (3).