Interlogix DVR 42 User Manual - Manual (Page 81)

TruVision DVR 42 User Manual 79
Menu Function Description
FTP Define the FTP settings. See “Configuring an
FTP server to store snapshots” on page 116 for
more information.
More Settings Define a remote alarm host, multicast IP as well
as the server, HTTP and RTSP ports. See page
117 for more information.
Serial Port
Settings 232 Serial Port Define the RS-232 parameters. See “Configuring
the RS-232 port” on page 132 for more
information.
485 Serial Port Define the RS-485 parameters.
Alarm Settings Alarm Input Define the alarm input parameters for when an
external alarm is triggered. See “Setting up
external alarms” on page 106 for more
information.
Alarm Output Define the response when an external alarm is
triggered. See “Setting up external alarms” on
page 106 for more information.
Alarm Audio Define the parameters to import an alarm audio
file. See “Alarm audio messages” on page 101.
Audio Output Define the parameters to import an alarm audio
file. See “Alarm audio messages” on page 101.
Advanced Settings Define the warning buzzer time. See “Modifying
the warning buzzer” on page 103 for more
information.
Notification Define the notification parameters when irregular
events occur such as HDD full. See “Description
of alarm notification types” on page 100 and
“Setting up system notifications” on page 108.
User Management Define, modify, and delete users. See Chapter 16
“User management” on page 139 for more
information.
HDD Management Basic Settings Initialize the HDD. See “Initializing HDDs” on
page 121 for more information.
Storage Mode Define the storage capacity of the HDD. See
“Controlling disk space on the HDD” on page 121
for more information.
SM.A.R.T. Settings List the S.M.A.R.T. information on the HDD.
Auto Archive Archive Settings Define archive scheduling as well as camera and
recording type selection. See “Auto archiving” on
page 70 for more information.
Archive Status Review archive status. See “Auto archiving” on
page 70 for more information.
Maintenance Remotely update the DVR firmware, restore
default factory settings, restart the DVR, and
import parameters remotely. See Chapter 15
“DVR management” on page 132 for more
information.