Interlogix DVR 42 User Manual - Manual (Page 47)

TruVision DVR 42 User Manual 45
Option Description
8. Scaling output video Enable/disable the monitor display of the main and spot monitor
size to accommodate for differently sized monitors.
Check the box to enable/disable and click Apply .
9. Enable wizard Define whether the wizard tool starts when the DVR is turned on.
Check the box to enable/disable and click Apply .
Figure 20: Monitor setup window: More Settings
Table 12: Description of the Monitor setup window: More Settings
Option Description
Monitor Standard The video standard used is auto detected but can be manually
changed.
Modify the video standard used to PAL or NTSC and click Apply .
Output Mode Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright,
Gentle, or Vivid.
Monitor Brightness Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply .
Event Hint Define whether the status icons appear on screen. See “Status
information” on page 33 for more information.
Timebar Transparent Modify the transparency of the menus on-screen relative to the
background to make the menu windows easier to read or less
prominent on-screen. Default is non-transparent.
Select one of the options from the drop-down list.
Menu Timeout Define the time in minutes after which the menu window reverts to
live view mode.
Select a time from the drop-down list and click Apply .
Mouse Pointer Speed Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level and click Apply .