Interlogix DVR 42 User Manual - Manual (Page 151)

TruVision DVR 42 User Manual 149
Figure 41: Keypad and DVR connections
I/O box
Back panel of
TVR 42
Setting up the keypad to work with the
TVR 42
The keypad must be in zone mode to connect correctly with the TVR 42.
Further information on connecting and programming the KTD-405 keypad can be
found in the user manual.
To set the keypad in zone mode:
1. Log into the keypad using the Admin password. Hold down the Enter button (
) until a beep sounds and then enter the following code: 1 4 7 6. Push the
seq button to confirm.
2. Scroll through the menus with the button until this menu appears:
3. Change Operating Mode to Zone by moving the joystick down.
4. Quit the menu by pressing the seq button. The display will show, for example: