Interlogix DVR 42 User Manual - Manual (Page 63)

TruVision DVR 42 User Manual 61
Click Exit in the playback control toolbar to return to the search results
window.
- Or -
Right-click the mouse and select Exit from the list to return to the search
results window.
- Or -
Right-click the mouse and select Video Search from the list to return to the
search window.
Playing back recordings by event
You can search recorded video by event type: motion, alarm input, and
POS/ATM text insertion. Video can be played back simultaneously across
several cameras.
To play back search results:
1. In live view mode, right-click the mouse and select Advanced Search >
Event .
2. Select the desired event type as well as start and end time of the recording.
3. Select the desired alarm inputs.
If you selected “Motion” as the event type, select the required cameras. If you
selected “Text insertion”, select the required cameras and enter the desired
keywords.
4. Click Search . The list of search results appears.
5. Play back the search results:
If there is only one camera in the search result, click its playback button.
Playback starts.
If there is more than one camera listed, click the playback button of one of
the cameras. In the window that appears, select the cameras you want to play
back simultaneously and click
OK . Playback starts.
6. To hide the playback control toolbar during play back, right-click the mouse
and select the Control Panel button in the playback control toolbar. Click
again for the panel to reappear.
7. Use the playback control toolbar to manually control playback.
8. To play back another camera, move the cursor to the right edge of the
window to display the list of cameras and select the desired camera.
9. To do another search:
Click Exit in the playback control toolbar to return to the search results
window.