Interlogix DVR 42 User Manual - Manual (Page 37)

TruVision DVR 42 User Manual 35
Figure 12: The mouse menu for the main monitor
The list of commands available depends on which monitor is active; main or spot
(monitor B). See Table 7 below. The default settings of these commands are
provided in Appendix G “Default menu settings” on page 160.
Table 6: Mouse menu for monitor A (main monitor)
Item Name Description
1. Menu Enter the Main menu.
This option is not available from monitor B.
2. Single Camera Switch to a full-screen view for the selected camera from
the dropdown list.
3. Multi Camera Switch between the different multiview options from the
dropdown list.
4. Previous Screen In single-camera mode, display the previous camera. In
multi-camera mode, display the previous screen cameras.
5. Next Screen In single-camera mode, display the next camera. In multi-
camera mode, display the next screen cameras.
6. Start Sequence Turn on sequence mode. The window automatically
sequences between cameras. See “Viewing in multiview”
on page 36.
Go to Menu > Display Mode Settings > Layout > General >
Dwell Time to set up.
7. All-day Playback Playback the recorded video of the selected day from the
selected camera. The current day is selected by default.
See “Previous-day playback” on page 58 for more
information.
8. Monitor B Switch between monitors A (main) and B (spot).
9. Advanced Search Enter the advanced video search menu. See “Searching
recorded video” on page 59 for more information.
10. Output Mode Select desired output mode: Standard, bright, soft, and
vivid.
11. Close TimeBar Open/close the time bar.