Interlogix DVR 42 User Manual - Manual (Page 30)

28 TruVision DVR 42 User Manual
Using the IR remote control
The TVR 42 is supplied with an infra red (IR) remote control unit. Like the mouse,
it can be used to operate all of the main functions of the TVR 42.
The IR remote control can be programmed with a unique device ID address so
that the controller will only be able to communicate with DVRs with that address.
No programming is necessary if using a single TVR 42.
The device ID address only applies when using a remote control and not when
using a keypad.
You can purchase a remote control by ordering part number TVR-REMOTE-1.
Figure 9: IR remote control
Item Description
1. Alarm Acknowledge an alarm.
2. Device Enable/disable the IR remote control to control the TVR 42.
3. Numeric buttons Select a camera, and enter a number in a menu option.
4. Display Switch between the different multiviews.
5. Mon A and Mon B Switch between monitors A and B.
6. Live Return to live view mode.