Interlogix DVR 42 User Manual - Manual (Page 113)

TruVision DVR 42 User Manual 111
Chapter 12
Network settings
You must configure your DVR’s network settings before using it over the network.
Note: As every network configuration may differ, please contact your Network
Administrator or ISP to see if your DVR requires specific IP addresses or port
numbers.
Configuring general network settings
To configure general network settings:
1. From the menu toolbar, click Network Settings > General .
2. Enter the required settings:
Option Description
NIC type Network interface card (NIC) is a device used to connect the
DVR to a network. Select the NIC type used from the drop-down
list.
Default value is 10/100/1000M self-adaptive.